| This is a photo of the boards notes from our class on cut lists. You can see the drawing of the door flat and to the right of that, the cut list of lumber needed to build the flat. |  |
| |  |
| |  |
| |  |
| This flat has labels for each piece of wood. The top and bottom rails run to the edge of the flat. The side stiles are shorter then the height. The toggle fits inside the stiles. The keystones and corner blocks sit on the back surface, holding the parts together. The cover is attached to the front. |  |
| This is the actual cut list. You can see that it lists each piece of wood needed |  |
| Toggle | 1@3'7"x1"x3" |
| Cover | 1@4'x8'x1/8thPly |
| Corner Blocks | 4@9"Triangles x 1/8th Ply |
| The Top & Bottom Rails | 2@4'x1"x3" |
| Stiles | 2@7'7"x1"x3" |
| Keystones | 2@9"x2"x1/8th Ply |
| | |
| | |
